SMA Solar Technology AG Security
2 Security
2.1 Intended Use
The Modbus interface of the supported SMA devices is designed for industrial use and has the
following tasks:
• Remote control of the grid management services of a PV system.
• Remote-controlled querying of the measured values of a PV system.
• Remote-controlled changing of the parameters of a PV system.
The Modbus interface can be used via Modbus TCP.
The enclosed documentation is an integral part of this product.
• Read and observe the documentation.
• Keep the documentation in a convenient place for future reference.
2.2 Skills of Qualified Persons
The activities described in this document must only be performed by qualified persons. Qualified
persons must have the following skills:
• Knowledge of IP-based network protocols
• Knowledge of the Modbus specifications
• Knowledge of the SunSpec specifications
• Knowledge of and compliance with this document and all safety information
2.3 Information on Data Security
net, there is a risk that unauthorized users can access and manipulate the data of your PV
system.
• Take appropriate protective measures, for example:
• Set up a firewall
• Close unnecessary network ports
• Only enable remote access via VPN tunnel
• Do not set up port forwarding at the Modbus port in use
Technical Information STP60-SunSpec_Modbus-TI-en-12 7