Sunny Boy 2500U Installation and Operator’s Manual
SB2500U-11:NE - 4 - SMA Regelsysteme GmbH
IMPORTANT SAFETY INSTRUCTIONS
• All electrical installations shall be done in accordance with the local and
national electrical codes ANSI/NFPA 70.
• The Sunny Boy contains no user serviceable parts. Please return the unit
to an SMA authorized Service Center (see page 56) for maintenance.
• Before installing or using the Sunny Boy, please read all instructions and
cautionary markings in the technical description and on the Sunny Boy
and the PV-array.
• Connecting the Sunny Boy to the electrical utility grid must only be done
after receiving prior approval from the utility company and performed only
by qualified personnel.
• Completely cover the surface of all PV-arrays with opaque (dark) material
before wiring them. PV arrays produce electrical energy when exposed to
light and could create a hazardous condition.
• On top of the device you can find the heat sink of the Sunny Boy with
potential temperatures of over 175°F (80 °C). To reduce the risk of burns,
do not touch.
SAVE THESE INSTRUCTIONS
To Next Page
Loading...
