EasyManua.ls Logo

SMA SWR 2500U - V1.2 - Page 42

SMA SWR 2500U - V1.2
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Sunny Boy 2500U Installation and Operator’s Manual
SB2500U-11:NE - 42 - SMA Regelsysteme GmbH
V-Const Sunny Boy is in constant voltage MPP mode
Derating reduction of the grid feeding power
Disturbance failure
Error messages
F-Bfr-Srr communication between micro-controllers is failing
F-EEPROM EEPROM cannot be read or written on
F-EEPROM dBh EEPROM cannot be read or written on
F-Fac-Bfr BFR-frequency measurement - value out of tolerable range
F-Fac-Srr SSR-frequency measurement - value out of tolerable range
F-dZac-Bfr BFR-impedance measurement - value out of tolerable range
F-dZac-Srr SSR-impedance measurement - value out of tolerable range
F-Imax internal over current
F-Shut-Down internal over current continuous
F-MSD-UAC different values between BFR and SRR for grid voltage
F-MSD-FAC different values between BFR and SRR for grid frequency
F-MSD-Meas different values between BFR and SRR for dI, Fac, Vac or Zac
F-K1-Close Relay test failed
F-K1-Open Relay test failed
F-EarthCurMax-S SRR-earth current between PV- and GND is out of tolerable range
F-EarthCurMax-B BFR-earth current between PV- and GND is out of tolerable range
F-MSD-ZAC different values between BFR and SRR for grid impedance
F-Offset Offset check for grid voltage failed
F-MSD-Timeout BFR or SSR controller failure
F-Vac-Bfr BFR-grid voltage measurement - value out of tolerable range
F-Vac-Srr SSR-grid voltage measurement - value out of tolerable range
F-VpvMax PV input voltage out of tolerable range
F-Zac-Bfr BFR-grid impedance measurement - value out of tolerable range
F-Zac-Srr SSR-grid impedance measurement - value out of tolerable range
F-Watchdog Watchdog for operation control triggered
F-GFDI Fuse Ope The GFDI-Fuse is defective
F-ROM Failure of Read only memory test

Related product manuals