Smappee Infinity - Tools (not included); Supplies (not included)

10
English – Version 1.2 – January 2021
BusinessLine G3
In the charging station, find the RS485 connection on the modem board PCB. The
figures below will help you find the connection.
Route the network cable into the charging station along the same route as the power
cable. When the cable enters the base of the station, drill a hole and use a cable
gland.
Connect the network cable to the modem board PCB using the gray 2-pole Phoenix
plug (supplied):
• Green > RS485 pin A
• Green/White > RS485 pin B
2
3
1
2
3