English – Version 1.2 – January 2021
EVBox physical installation
Install the EVBox car charging station according to the EVBox installation manual. Download the
installation manual at evbox.com/en/manuals.
The following sections describe the connection of the RS485 cable to the following types of charging
station:
•
BusinessLine G3
•
BusinessLine G4
• HomeLine
• Elvi
For each type of charging station, refer to the related Installation Manual for instructions about
removing the cover to access the Smart Charging connection points.
IMPORTANT: The following steps assume that the EVBox car charging station
installation has been completed. If this is not the case, please follow the
installation manual at evbox.com/en/manuals .