SMART Board Interactive whiteboard

To Next Page

To Previous Page

and company names may be tradmarks of their respective owners. Printed in Canada 03/2008.

The Pen-Tray Buttons

The pen tray has at least two pen-tray buttons. One button is used to launch the On-Screen Keyboard. The second button

is used to make your next touch on the interactive whiteboard a right-click. Some interactive whiteboards have a third button;

this button is used to quickly access the Help Center.

The Pens

The SMART Board interactive whiteboard comes with four Whisper-tip™ pens

(black, red, green and blue) and one eraser. Although you do not need to use

the pens to write on you interactive whiteboard, the pens do make writing more

intuitive. Pick up a pen from the pen tray and write on the SMART Board. To

erase your digital ink, remove the eraser from the pen tray and move it in a

smooth motion over your notes. Your notes will disappear.

TIP: To clear a large area of digital ink, draw a circle around the area you want

to erase with the eraser and tap once inside that area. All handwritten notes

inside that circle will disappear.

The Ready Light

The Ready Light indicates the status of your interactive whiteboard. Depending on the model of the SMART Board

interactive whiteboard you are using, the Ready Light is located either on the right side of the pen tray or the lower-right of

the frame bezel.

If the Ready Light is a solid green, your system is functioning properly. If the Ready Light is flashing or is a color other than

green for an extended period of time, you should check the User’s Guide that came with your SMART Board interactive

whiteboard for guidance on troubleshooting.

NOTE: After you turn on your computer, the Ready Light will be red while the SMART Board interactive whiteboard and the

computer are establishing communication.

Pen tray buttons

Ready Light on lower-right

of frame bezel

Ready Light on right

side of pen tray

SMART Board Interactive whiteboard - The Ready Light