Smart Dedicated Design STR7202 - Safety; Symbols

Installation Manual STR7202 TAG4 & SFM7704 TAG1
DBCI-0512-0052-V013
STR7202 2-Side Trimmer & SFM7704 Square Fold Module
Name: RI01
Date: 29-3-2017
Page: 6 / 72
1. Safety
Contents
IMPORTANT:
Carefully read the Safety Instruction Document (DBCH-0512-0000-0000
) before installing,
servicing or operating your equipment.
1.1 Symbols
Symbols used in this manual
The following symbols are used in this manual to explain procedures, restrictions, handling, precautions, and
instructions that should be observed for safety.
WARNING / CAUTION
Indicates a warning /caution concerning operations that may lead to
death or injury to persons if not performed correctly. To use the
machine safely, always pay attention to these warnings/cautions.
CAUTION
Indicates a warning concerning operations that may lead to death or
injury to persons due to high voltage. To use the machine safely,
always pay attention to these warnings.
CAUTION
Indicates a caution concerning operations that may lead to injury to
persons due to sharp (cutting) objects. To use the machine safely,
always pay attention to these cautions.
CAUTION
Indicates a caution concerning operations that may lead to injury to
persons due to crushing or squeezing of body parts. To use the
machine safely, always pay attention to these cautions.
IMPORTANT
Indicates operational requirements and restrictions. Be sure to read
these items carefully to operate the machine correctly and avoid
damage to the machine or property.
IMPORTANT
Indicates the use of an additional manual to be used or read. Be sure
to read this carefully to avoid damage to machine, persons or property.
NOTE
Indicates a clarification of an operation, or contains additional
explanations for a procedure. Reading these notes is highly
recommended.
NOTE:
Do not use the machine when it shows defects or makes unusual
noises. Turn the machine off and disconnect the machine from the
main power supply. Contact your dealer.