100°F (10°C to 38°C). Any skipped tests due to a dead
battery will be reported. The battery charge level is
indicated by the battery icon on the display (see Figure 3
below). It is your responsibility to keep the battery fully
charged. When the charger is connected and the device is
charging, you will see the battery icon with the charge
indicator (see Figure 3 below).
Figure 3
Test Windows
A Test Window is the period of time allowed for taking a
required test. When the SmartMobile Insight
device
reaches the scheduled test window, the unit will beep,
and a countdown timer will appear on the display with
the message “Test required – Press button to start test.”
You must take a test before the timer expires. As the
timer approaches zero, the unit will beep more rapidly.
If you miss your test window, it will be logged as a Missed
Test. Missing a test is a violation, and all violations are
reported. Taking a test after the test window has expired
does not reverse previously missed required tests.
If the SmartMobile Insight
device shows “Press button to
start test” on the display, voluntary testing is permitted
outside of a test window period.
You may be contacted by your monitoring authority(s) to
take a test outside of your test windows.
Testing Requirements
Lighting
The SmartMobile Insight device takes a photo of your face
Battery icon shown here on top of display
Battery icon when charging
To Next Page
Loading...
