3. Use inch screws to fix the camera on the
bracket, fix the limit screw according to
actual requirement, and make sure the
camera is tightly fixed onto the bracket
before your hands leave the camera.
Ceiling Mount Installation
1. According to diameter and position of the
3 installation hole (as shown below), drill 3
holes on the ceiling or cement roof
correspondingly.
2. Fix the mounting plate onto the ceiling or
cement roof with 3 screws which should
be prepared by you.
3. Before fixing the camera, set the DIP
switches of the camera correctly.
4. Use 3 screws to fix the camera on the
ceiling mount plate.
5. Push forward camera's bottom slide
according to the mounting plate’s bottom
slide until they reach their limit. Fix the
ceiling mount plate and camera’s bottom
plate with M3×8 screws.
To Next Page
Loading...