Video mode
Safety note
G
WARNING
Only when the vehicle is stationary should
you:
R
load a disc
R
eject a disc
There is a risk of being distracted from the
road and traffic conditions if this is done
while the vehicle is in motion.
DVD playback conditions
There are video DVDs available on the mar-
ket which do not conform to the current
standards. Such DVDs may have picture,
sound or other playback problems.
The audio system navigation/multimedia
operating system can play back video DVDs
produced according to the following stand-
ards:
R
region code 2 (for Europe) or region code
0 (no region code)
R
PAL or NTSC standard
You will generally find the relevant
details either on the DVD itself or on the
DVD case.
i
Audio system navigation/multimedia
is set to region code 2 at the factory.
i
If you insert a video DVD with a differ-
ent region code, you will see a message
to this effect.
Function restrictions
If you would like to use the video function,
you first need to:
X
Switch off the navigation (Y page 33).
X
Apply the parking brake (see the vehicle
Owner's Manual).
The video image is hidden during the jour-
ney. The For safety video watching is
not possible while driving or navi‐
gating ! message appears.
Data medium for video mode
The following data media can be used for
playback:
R
Video DVD, video CD
R
DVD-R/RW, CD-R/RW with video files
R
USB device
R
SD/MMC memory card
Switching video mode on
Option 1: inserting or connecting a data
medium
X
Insert a video DVD/video CD (Y page 87).
or
X
Insert an SD/MMC memory card
(Y page 88).
or
X
Connect a USB device (Y page 89).
The data medium is read.
X
To start playback: playback starts auto-
matically for video DVDs/video CDs. For
all other data media, press ;
(Y page 103) in the basic display.
Option 2: selecting a data medium in the
video main menu
A data medium is inserted or connected to
audio system navigation/multimedia.
X
Press Video in the main menu
(Y page 10).
The video main menu appears.
102
Video mode
>> Video.
To Next Page
Loading...
