distance before the next change of direc-
tion are shown.
Example: compass display
You see the following information:
R
current direction of travel
R
latitude coordinates
R
longitude coordinates
R
current height above mean sea level
R
number of satellites currently being
used
The bar underneath shows the following
information:
R
current height above mean sea level
R
current time (if route guidance is not
active)
R
remaining journey time to next destina-
tion (intermediate stop, final destina-
tion)
R
remaining distance to next destination
(intermediate stop, final destination)
R
estimated time of arrival at next desti-
nation (intermediate stop, final desti-
nation)
X
To close the compass display: press &.
Stopping route guidance
X
Press Stop route guidance in the nav-
igation main menu (Y page 33).
Route guidance is interrupted.
Destination reached
When you reach your destination, a cheq-
uered flag is displayed on the right-hand
side of the display and route guidance is
ended automatically.
Navigation announcements
Switching navigation announcements on/
off
Option 1
X
To switch off: press W the control knob
briefly during a navigation announce-
ment.
X
To switch on: press the arrow indicating
the direction of travel on the map
(Y page 47).
The current navigation announcement is
repeated.
i
Navigation announcements are muted in
the event of a traffic announcement, an
incoming call or during a phone call.
Option 2
X
Press the arrow at the bottom left of the
map (Y page 47).
The navigation main menu appears.
X
Press d.
The settings menu appears.
X
Press Speech output.
The "Speech output" menu appears.
X
Press Speech output again.
Depending on the previous setting, the
function is switched on or off.
Announcing the street names
X
Press the arrow at the bottom left of the
map (Y page 47).
The navigation main menu appears.
X
Press d.
The settings menu appears.
Route guidance
49
>> Navigation.
Z
To Next Page
Loading...
