X
Press 9 or : to scroll through the
list.
X
To close the route list: press &.
Checking the traffic conditions
X
Press Traffic information in the
"Route information" menu.
The list shows the current TMC traffic
announcements. Traffic announcements
with a red symbol affect the current
route, traffic announcements with a grey
symbol apply to other sections of road.
i
The list can be displayed by pressing
the TMC symbol on the top right-hand
side of the display (Y page 47). The dis-
play does not depend on the RDS TMC
radio station currently playing.
X
To close the list: press &.
Setting the map to a route position
X
Press Go to... in the "Route informa-
tion" menu (Y page 50).
A menu appears.
X
Press Current position, Destination
area, Overview or Starting point.
The map shows the route section with the
selected route position or a complete
overview of the route.
Blocking a section of the route
It is possible to block more than one route
section. The number of active blocks can be
seen in the "Length of avoided route" and
"Start of avoided route" lists at the top
right.
X
Press Avoid route in the "Route infor-
mation" menu (Y page 50).
The "Length of avoided route" list
appears.
X
Press a selection option, e.g. 5 km, to
select the extension of the block.
The "Start of avoided route" list
appears.
X
Press Immediately or another selection
option to determine when the block
should start.
The route section is blocked. The route
is recalculated.
X
To delete blocks: press 1 at the bottom
right in the "Length of avoided route"
list.
Route guidance
51
>> Navigation.
Z
To Next Page
Loading...
