Hussar Robot Chassis Manual
Smart Restaurant Solutions 11
Note for shutdown: Press and hold the power button for 3 seconds, the
display will first turn off the screen and shut down, then the motor will be
powered off, and finally the chassis light will go out!
B. Charging
Get to know your charger：The adapter plug needs to be plugged into
the 110-220 V voltage, and the DC head is plugged into the automatic
charging pile. At this time, the green light of the charging pile will be on,
indicating that it is ready for charging.
Automatic charging: the robot can automatically detect the power and
charge automatically when the power is lower than the set threshold
(Prerequisite: It is necessary to construct a good icon for the charging pile)
To Next Page
Loading...