Hussar Robot Chassis Manual
Smart Restaurant Solutions 29
②MODIFY: adjust the edited speed area, click on the speed area that needs
to be edited, the color of the area will change (the line around the selected
area will become thicker and become red), then pull the line to proceed
Area size adjustment
③AREA LIST: After clicking, the edited area list will pop up on the right side
of the page. You can redefine the speed and name of the area in the area
list and delete the area.
④CLEAR ALL: Refers to one key to clear all edited special areas
Note: After editing is completed, click Save to take effect
b [ Modify map ]
Editing premise: The map has changed after the scan is
completed, and the map editing function can be used to edit the
map appropriately if the change is not significant. If the map is
too different from the actual environment, it is recommended to
scan the map again.
To Next Page
Loading...