Hussar Robot Chassis Manual
Smart Restaurant Solutions 24
location calibration
⑤Charging_pile: point the charging shrapnel of the robot directly to the
shrapnel of the charging_pile, and then click "charging_pile" to calibrate,
and the icon will automatically move forward when the calibration occurs
(note: only this point is the exception)
⑥Calibration list: Click on the right side of the screen to pop up ⑦this
"location list" and "route list"
The calibration example is as follows:
Precautions:
1. When calibrating the position, make sure that the current
positioning of the machine is correct.
2. The calibrated position must be at least 50 cm away from
To Next Page
Loading...