SMART radio 10 - Factory Settings and Reset; Audio AUX Mode

Factory Settings
If desired, you can reset the sound settings
to the factory settings (sets all values to
0).
X
Press and hold the BASS/TREB button.
Bass and Treble
Setting the bass
X
Press the BASS/TREB button repeatedly
until the bass menu appears.
X
To set the desired value (-7 – +7): turn
the control knob clockwise or anti-
clockwise.
X
To confirm the value and exit the menu:
press any button.
Setting the treble
X
Press the BASS/TREB button repeatedly
until the treble menu appears.
X
To set the desired value (-7 – +7): turn
the control knob clockwise or anti-
clockwise.
X
To confirm the value and exit the menu:
press any button.
Balance
Setting the balance
X
Press the BAL button.
The balance menu appears.
X
To set the desired value (-7 – +7): turn
the control knob clockwise or anti-
clockwise.
X
To confirm the value and exit the menu:
press any button.
Audio AUX Mode
You can connect an external audio source
(audio AUX) to the smart radio 10. More
information is available from any
qualified specialist workshop, e.g. a smart
center or a smart service outlet.
You will find a permanently installed
3.5 mm phone jack in the left of the glove
compartment to which you can connect
external audio equipment (e.g. an MP3
player).
1
Socket for connecting external audio
equipment (AUX jack)
Switching to AUX Mode
From within radio or CD mode:
X
Press the SRC button repeatedly until
AUX appears.
You will hear the external audio source
if it is connected and switched to
playback.
10
>> At a glance.
audio_ZA; 1; 6, de-DE
sabbaeu, Version: 2.11.4
2008-11-10T16:21:39+01:00 - Seite 10