SMART radio 10 - Reset

For information on the operation of the
external audio source, please read the
operating instructions of the external
equipment.
You can set the following in AUX mode:
R
Volume (Y page 9)
R
Balance (Y page 10)
R
Bass and treble (Y page 10)
Activating/deactivating AUX Mode
If you do not wish to connect an external
audio source, you can deactivate AUX mode.
If you do so, the smart radio 10 will only
switch between radio and CD mode when the
SRC button is pressed.
You can reactivate the function at any time.
X
Press and hold the MENU button.
The second menu level is called up.
X
Press the ý or þ arrow button
repeatedly until the AUX menu appears.
X
To change the setting (AUX ON/OFF): turn
the control knob clockwise or anti-
clockwise.
X
To store the setting: press the control
knob.
RESET Function
The RESET function resets all settings you
have made for the smart radio 10 to the
factory settings.
X
Press and hold the MENU button.
The second menu level is called up.
X
Press the ý or þ arrow button
repeatedly until the RESET menu item
appears.
X
To change setting (RESET ON/OFF):
turn the control knob clockwise or anti-
clockwise.
X
To confirm the setting: press the control
knob.
If you confirm RESET ON, all menu
settings of the radio will be reset to the
factory settings.
>> At a glance.
11
audio_ZA; 1; 6, de-DE
sabbaeu, Version: 2.11.4
2008-11-10T16:21:39+01:00 - Seite 11
Z