Water supply valve
ᆞBeware to not use any bathroom cleaning detergents such as benzene acid
chemical detergent on the seat exterior.
- Using any type of chemical products or rough scrubbers on the electronic toilet seat surface,
which is made out of plastic material can either damage or change its color.
ᆞDo not spray water directly or use a shower hose on the main body unit.
- Can cause fire or damage to the unit.
ᆞWhen cleaning, the power cord must be unplugged from the power outlet,
and make sure water does not contact the cord and/or outlet.
ᆞAfter cleaning, use a soft cloth to dry the unit.
ᆞPlease perform the actions below without sitting on the toilet seat
- On control panel press and hold the ‘For Her Back’ button for three (3) seconds and the water nozzle will extend.
- To clean use a soft bristled brush(tooth brush) or a soft cloth. Upon completion press and hold the‘For Her Back’
button and the nozzle will retract back to its original position and will perform it’s self-cleaning function.
- Upon completion of these two steps the toilet seat can be used.
Do not use any cleaning products such as Oxy Clean.
Water filter
(Strainer)
18
10
Maintenance
Cleaning the body unit
Cleaning the nozzle
Cleaning the water filter(strainer).
1) Close the water shut off valve.
2) Flush the toilet to empty the water reservoir.
3) Unscrew the water hose nut.
4) Clean the strainer with a small brush or water
5) Re-screw the water hose nut.
6) Open the water shut off valve.
SB-2000.indd 18 2019-02-15 오후 2:07:35
To Next Page
Loading...
