Troubleshooting Factors to check
The water does not spray
ᆞCheck if the water tank is filled.
ᆞSee if the water valve is closed.
ᆞCheck if the water filter (strainer) is clogged.
The unit is not operating
ᆞCheck if the power cord is connected.
ᆞSee if the power is turned off from the main unit.
ᆞSee if you are correctly sitting on the seat so that
the skin sensor switch will function properly.
(Make sure that the Skin sensor on the seat touches your skin when you sit on the seat.)
Water is leaking
ᆞAfter checking if the plumbing is correctly connected, if water is leaking
from the main unit disconnect and contact service personnel.
Water pressure is weak
ᆞCheck if the water pressure is set at “low”.
ᆞCheck if the water filter (strainer) is clogged.
Seat, water and
dryer is not warm
When the nozzle doesn’t
come out
ᆞSee if the water temperature is set to “low”.
ᆞCheck if the dryer temperature is set to “low”.
ᆞSee if the skin sensor on the seat is touching the skin.
When water is cold or warm
Body unit shakes
Dryer does not work
ᆞAdjust the temperature to (mid, high).
ᆞ
If someone has already used the wash function, wait about 3 minutes to use it.
ᆞSit on the seat for approximately 3 minutes and then use it.
ᆞTighten the bolt (do not over-tighten)
ᆞSee if the skin sensor on the seat is touching the skin.
20
13
※ Please be sure to check the following aspects before asking for help.
Trouble shooting
SB-2000.indd 20 2019-02-15 오후 2:07:36
To Next Page
Loading...
