Specification
Water inlet
type
Wash
device
Heated seat
Warm Air
Dryer
Device
Inlet water temperature 37.4 °F ~ 95°F (3°C ~ 35°C)
Ambient temperature 37.4 °F ~ 104°F (3°C ~ 40°C)
W : 18.7inch (475mm)
L
: 20.6inch (525mm)
H : 7.13inch (181mm)
W : 18.7inch (475mm)
L
: 19.4inch (493mm)
H : 7.13inch (181mm)
Elongated Round
Dimensions
Weight (Ibs)
N.W. : 10.7 lbs (G.W. : 15.4 lbs) N.W. : 10.6 lbs (G.W. : 15.4 lbs)
※ The design and function of this product could be changed without notice for the improvement of its quality.
Type
Water inlet pressure
For Her Back Wash
120V / 60Hz / 660W
Direct Inlet Flow Type
0.04 ~ 0.74MPa(0.4 ~ 7.5 kgf/cm²)
Max. 700cc ± 150cc / min.
For Her Front Wash
For His Back Wash
Max. 700cc ± 150cc / min.
Max. 700cc ± 150cc / min.
Water pressure
adjustments
5 levels
Warm water temperature
control
Room Temp. Low, Normal , High
Heater 600W
Safety device Thermal fuse, Thermal switch, Float switch
Temperature control
RRoom Temp. Low, Normal , High
Heater 55 W
Safety device Thermal fuse, Bimetal
Room temp ~ 131 ℉ , 5 levels
250W
Thermal fuse, Bimetal
Warm air control
Heater
Safety device
Power rating
SB-2000
21
14
Specifications
E
N
G
L
I
S
H
SB-2000.indd 21 2019-02-15 오후 2:07:37
To Next Page
Loading...
