Turn the water valve to the left and see if there is any water leaking from the hose.(~)
Connect the power cord to the 120V electric outlet.
ᆞIf the power light does not appear after plugging in the electric cord,
press any button on the remote control.
ᆞIf you hear a ‘beep’ sound, then the lights will appear on the
power lamp.
ᆞIn order to check whether the functions work, you will first need to touch the seat or sit on it to
activate the skin sensor.
ᆞPlease be aware that water will come out. This product can only operate when the user sits on the
electronic toilet seat.
ᆞIf the tank is full, then a low beeping sound will occur which indicates that
preparation is complete.
If you press or button, the water will begin to enter the heated water tank.
Function Check
Water supply valve
12
6
Initial Operation
SB-2000.indd 12 2019-02-15 오후 2:07:32
To Next Page
Loading...