Need help?Do you have a question about the Smartgen HGM420N and is the answer not in the manual?
General| AC Frequency | 50/60Hz |
|---|---|
| Weight | 0.5kg |
| Communication Ports | RS485 |
| Operating Temperature | -25°C to +70°C |
| Storage Temperature | -40°C to +85°C |
| Relay Output (Programmable) | 5A/250VAC |
| Humidity | 95% Non-Condensing |
| Communication Protocol | Modbus RTU |
| DC Supply | 9-35VDC |
Explains the sequence of events for automatic start and stop of the genset.
Details how to start and stop the genset manually using the controller.
Lists and describes warning alarms that do not cause immediate shutdown.
Lists and describes alarms that will cause the genset to shut down.
Guide on accessing and modifying controller parameters through the menu system.
To Next Page