Need help?Do you have a question about the Smartgen HGM410 and is the answer not in the manual?
General| Model | HGM410 |
|---|---|
| Type | Generator Controller |
| Display | LCD |
| Frequency | 50/60Hz |
| Communication | RS485 |
| Protection Level | IP55 (front panel) |
| Input Voltage | DC 8V to 35V |
| Power Consumption | MAX 3W |
| Speed Sensor Frequency | 10Hz-10kHz |
| Relay Output (Fuel) | 7A DC28V |
| Relay Output (Start) | 7A DC28V |
| Relay Output (Programmable) | 5A/250V AC |
| Protection Features | Over Voltage, Under Voltage, Over Frequency, Under Frequency, Over Current |
| Operating Temp. | -25°C to 70°C |
| Storage Temperature | -40°C to 85°C |
| Humidity | 5~95%RH |
Describes the sequence and logic for automatic generator start and stop sequences.
Details shutdown alarms that cause the generator to stop operation.
Lists all configurable parameters, their ranges, and default values.
To Next Page