Need help?Do you have a question about the Smartgen HGM410N and is the answer not in the manual?
General| Display | LCD |
|---|---|
| Frequency | 50/60 Hz |
| Communication Ports | RS485 |
| Protection Level | IP55 (Front Panel, when installed) |
| Dimensions | 110mm x 95mm x 46mm |
| Weight | 0.23kg |
| DC Supply | 8 to 35 VDC |
| Relay Output | 5A/250VAC, 5A/30VDC |
| Operating Temperature | -25 to +70°C |
| Storage Temperature | -40 to 85°C |
| Humidity | 95% non-condensing |
Explains the process and sequence for automatic start and stop of the genset.
Details the procedure for manually starting and stopping the genset using the controller.
Lists and describes warning alarms detected by the controller, indicating potential issues.
Details shutdown alarms that will stop the genset and open the breaker.
Lists all configurable parameters, their valid ranges, and default settings.
Explains how to enter and navigate the parameter setting menu.
To Next Page