Need help?Do you have a question about the Smartgen HGM1790N and is the answer not in the manual?
General| Model | HGM1790N |
|---|---|
| Frequency | 50/60Hz |
| Protection Level (Front Panel) | IP65 |
| Communication Interface | RS485 |
| DC Supply | 8-35V |
| Relay Output Cranking | 1 |
| Relay Output Fuel | 1 |
| Operating Temp | -20°C to +70°C |
| Storage Temp | -30°C to +80°C |
| Humidity | 5% to 95% (non-condensing) |
| Dimensions | 240mm x 190mm x 60mm |
Describes the physical layout and indicators on the front panel of the controller.
Explains the meaning and behavior of various indicator lights on the controller.
Details the function and description of each key on the controller's panel.
Lists and defines the various icons displayed on the controller's LCD screen.
Explains the different data displays and their meanings on the LCD screen.
Details the sequence of operations for automatic starting and stopping of the genset.
Describes the procedures for manually starting and stopping the genset.
Lists parameters, their ranges, default values, and descriptions.
Details the definable contents and items for relay outputs.
Details the definable contents and items for digital inputs.
Provides options and remarks for selecting temperature, oil pressure, and fuel level sensors.
Lists and explains the conditions for selecting crank disconnect settings.
Explains how to enter and set parameters using the password interface.
Describes how to adjust the LCD contrast level on the controller.
Explains the automatic adjustment of generator flywheel teeth based on frequency and speed.
Details the process of using fixing clips for panel-mounted installation.
Provides the overall dimensions and cutout dimensions for the controller.
To Next Page
