What to do if my smartheart Blood Pressure Monitor display is blank when power is on?
If the display of your smartheart Blood Pressure Monitor is blank when you turn it on, the battery might be dead or without charge. To solve this, recharge the battery by following the ‘charging the battery’ instructions in this manual.
Why does my smartheart Blood Pressure Monitor display an abnormal result?
If your smartheart Blood Pressure Monitor displays an abnormal result, it might be due to several reasons. First, ensure that the cuff is applied correctly and is tight enough. If not, adjust it and try again. Second, review the ‘Taking Your Blood Pressure Reading’ section of this manual to correct your body posture during measurement and attempt a new measurement. Lastly, avoid speaking or moving during the measurement, and ensure you are calm; then, try again.
General| Model Number | 01-509BL-HSN |
|---|---|
| Category | Blood Pressure Monitor |
| Type | Upper Arm |
| Measurement Method | Oscillometric |
| Memory | 60 Readings |
| Display | LCD |
| Power Source | 4 AA Batteries |
Provides essential precautions for safe operation, including advice on over-inflation and usage with other medical equipment.
Details safe storage practices to prevent device malfunction, including temperature and humidity guidelines.
Details specific conditions or user types for whom the device is not suitable, such as pregnant women or those with implanted electrical devices.
To Next Page
