What to do if my smartheart 01-539 display is blank when power is on?
If the display of your smartheart Blood Pressure Monitor is blank when powered on, the batteries might be expired or installed incorrectly. Check the polarity of the batteries and reinstall them if needed. If that doesn't work, replace the batteries with new ones.
What to do if my smartheart 01-539 Blood Pressure Monitor has no response when POWER is pressed?
If your smartheart Blood Pressure Monitor doesn't respond when you press the POWER button, even after loading new batteries, it could be due to incorrect operation or strong electromagnetic interference. Try removing the batteries and waiting for at least five minutes before reinstalling them. Then, attempt a new measurement. Alternatively, the battery may be low, so replacing the batteries, removing and reinserting them, and attempting a new measurement may resolve the issue.
Why does my smartheart 01-539 display show an abnormal result?
An abnormal result on your smartheart Blood Pressure Monitor may occur due to several reasons: * The cuff was not positioned correctly or was not tight enough. To resolve this, apply the cuff properly and attempt a new measurement. * Your body posture was incorrect during the measurement. Refer to the ‘Taking Your Blood Pressure Reading’ portion of this manual and try again. * You were speaking, moving excessively, angry, excited, or experiencing nervous anxiety during the measurement. Wait until you are calm, then attempt a new measurement without speaking or moving.
General| Model Number | 01-539 |
|---|---|
| Category | Blood Pressure Monitor |
| Measurement Method | Oscillometric |
| Display | LCD |
| Product Name | SmartHeart |
| Type | Upper Arm |
| Pulse Rate Range | 40-199 beats/minute |
| Memory | 60 readings |
| Power Source | AA batteries |
General safety advice for operating the blood pressure monitor.
Safety precautions during the operation of the blood pressure monitor.
Safety guidelines for storing the blood pressure monitor.
Safety instructions for cleaning the blood pressure monitor.
Explains the various symbols and indicators shown on the monitor's digital display.
Preparation steps and recommendations before taking a blood pressure reading.
Instructions on how to assemble the blood pressure monitor cuff.
Step-by-step guide on how to properly apply the cuff to the arm.
Explanation of the Irregular Heartbeat symbol and its meaning.
Explains the Hypertension Indicator and WHO blood pressure classification standards.
Instructions on how to access and review stored blood pressure readings.
Steps to erase stored blood pressure readings from the monitor's memory.
Guidelines for cleaning and maintaining the main monitor unit.
Instructions for cleaning, disinfecting, and maintaining the blood pressure cuff.
Guidance and declaration regarding the monitor's electromagnetic emissions.
Guidance and declaration regarding the monitor's electromagnetic immunity (enclosure port).
Guidance on immunity to proximity fields from RF wireless communications equipment.
To Next Page
