smartheart 01-539 Quick Start Guide

Taking the Measurement
1.Position the monitor on a
at, stable surface with the
digital display in view.
Insert the cuff tubing
connector into the port on
the left side of your
monitor. Rest your elbow
on a solid surface with your
palm facing upward.
Elevate your arm so that the
cuff is at the same level as
your heart. Relax your left hand.
2.Press the START button to turn the
unit on; the unit will run a self-test,
Fig 1.
3.The display will show the current
memory bank in use, U1 or
U2, Fig 2. Press the MEM
button to select a different
memory bank if desired. If
no selection is made, the
unit will default to the
memory bank displayed.
The display will briey show
a ashing arrow and ‘0’
before the measurement begins.
4.The cuff will automatically inate to
approximately 190mmHg or 40
mmHg higher than the last systolic
pressure reading stored in memory.
5.When the measurement is
complete, your blood pressure
measurement and pulse will
display separately on the screen
alternating repeatedly every 2-3
seconds, Fig 3. The systolic and
diastolic readings will display at
the same time.
A 15 minute resting period is needed to stabilize the
body prior to taking a reading. No
eating, drinking or smoking while resting.
Applying the Arm Cuff
Remove any constrictive clothing or
jewelry that may interfere with cuff
placement. Wrap the cuff snugly around
your left arm. Position the cuff’s bottom
edge one inch ABOVE the elbow joint.
Position the ( ) cuff symbol over the main
artery (on the inside of your arm). You
should be able to insert one nger between
your arm and cuff.
QUICK START GUIDE • ENGLISH
THIS QUICK START GUIDE IS INTENDED AS
A SUPPLEMENT TO THE INSTRUCTION
MANUAL. PLEASE READ THE COMPLETE
MANUAL PRIOR TO FIRST USE.
IF YOU HAVE ANY QUESTIONS OR ARE EXPERIENCING DIFFICULTIES, PLEASE CALL THE TOLL-FREE
CUSTOMER SERVICE HELP LINE FOR FURTHER ASSISTANCE AT 1-866-326-1313.
#93-2038 06/14
©2014 Veridian Healthcare
Before applying your blood pressure cuff, be sure you
have selected the appropriate size cuff: Adult Cuff ts
arm circumference 11-3/4” - 16-1/2” (30-42 cm).
Additional cuffs are available for order on the included
order form or by calling 866-326-1313.
Fig. 1
Please Note:
• You can stop the ination or deation process of
the cuff at any time by pressing the START button.
• Many factors such as genetics, age, sex, altitude,
physical activity, anxiety, muscular development,
certain medications or even the time of day can
inuence blood pressure.
• Blood pressure varies from moment to moment;
even readings taken after proper rest periods can
vary. Home blood pressure readings may vary as
much as 10-20 points from ones taken at your
doctor’s ofce.
• Variations in your individual readings should only
be interpreted by your physician or trained health
care professional.
• We encourage you to consult with your physician
to achieve the maximum benet from your blood
pressure monitor.
Automatic Digital
Arm Blood Pressure Monitor
Model # 01-539
Main
Artery
6.Consult the included Instruction Manual for
information on interpreting your reading results.
7.The results will automatically be stored in the
selected memory up to 60 readings.
8.Select START to turn the unit off and conserve
energy and battery life. The unit will automatically
shut-off and revert to time/date mode after
approximately 1 minute.
MEM
Fig. 2
Systolic/Diastolic Results
Pulse Results
Fig. 5

smartheart 01-539 Specifications

General

Model Number	01-539
Category	Blood Pressure Monitor
Measurement Method	Oscillometric
Display	LCD
Product Name	SmartHeart
Type	Upper Arm
Pulse Rate Range	40-199 beats/minute
Memory	60 readings
Power Source	AA batteries