Smarti Pi Touch Pro User Manual

Assembly instructions
Power supply
Always use a UL or CE marked wall power supply with the included splitter cables. Use a wall power
supply that can deliver enough current for your application. For best results, use a 5.1 volt power
supply to avoid low voltage warning on the display. The official Raspberry Pi power supply is recom-
mended.
The splitter cables are only for use with the Raspberry Pi and Official Raspberry Pi display.
Step 1
Please choose which splitter works your Raspberry Pi model. Insert the female end into the back cover
as shown below. The cable can be assembled in either of two positions. Option 1 extends further out for
easier access. Option 2 is the more compact option.
option 1 option 2
Questions or missing parts? Email info@smarticase.com
5.1 V 2.5A Micro USB Power
supply recommended
5.1 V 3A USB-C Power
supply recommended
Raspberry Pi 2 and 3
Raspberry Pi 4
Micro USB input
USB-C input
USB-C (Pi 4)
Micro USB (display)
Micro USB (display)
Micro USB (Pi 2 and 3)
Drawings and CAD files are available at smarticase.com

Smarti Pi Touch Pro Specifications

General

Display Size	7 inch
Touchscreen	Yes
Power Supply	5V / 2A
Display Compatibility	HDMI
VESA Mount	Yes
Aspect Ratio	16:9
Brightness	250 cd/m²
Operating Temperature	0°C to 50°C
Storage Temperature	-20°C to 60°C
Power Consumption	5W
Input Voltage	5V
Compatible Raspberry Pi Models	Raspberry Pi 4, 3
Material	Plastic
Mounting Options	desktop stand
Resolution	1024 x 600 pixels
Features	Built-in speakers

Summary

Power Supply Requirements

Raspberry Pi 2 and 3 Power Supply

Specifies the recommended 5.1V 2.5A Micro USB power supply for Raspberry Pi 2 and 3.

Raspberry Pi 4 Power Supply

Specifies the recommended 5.1V 3A USB-C power supply for Raspberry Pi 4.

Step 1: Select Splitter Cable

Step 2: Secure Power Cable Retainer

Step 3: Assemble Metal Base

Step 4: Connect Display Board

Step 5: Mount Display in Housing

Step 6: Prepare Port Blocking Part

Step 7: Install Pi in Housing

Step 8: Install Camera Cover or Camera

Step 9: Mount Housing to Stand

Step 10: Install Optional Fan Door

Step 11: Attach Fan Vibration Mounts

Step 12: Mount the Fan

Step 13: Connect Fan Power

Step 14: Attach Back Cover

Step 15: Adjust Display Angle

Adhesive Front Panel Installation

VESA Mounts Installation