33
Recording via EPG
You can create a schedule of the transmissions to be recorded using the EPG feature.
Click the EPG button on the remote control. Highlight, by selecting, the channel and the
program to be recorded and press the Green button (wait a few seconds to receive the
EPG information). Move the cursor to Timer Service and set the option PVR and then
Save click and press OK to create the schedule.
The EPG function allows information on channel programming
up to a maximum of 7 days. This information depends on the
individual channel.
Playback
When both manual and programmed recording is complete, press the button USB then
tap on button 1 (move to PVR) to view the list of what was recorded. Alternatively, press
the button Menu, then move to the menu MediaPlayer, then PVR. Select the file from
the video to play and touch OK. Press Stop to stop playback.
In the menu, System Setup->Timer Setting can be used to
delete programming that is no longer required. Enter the
Programming, move the Timer Mode = Off and then highlight
the item Save and click on OK button on the remote control.
To Next Page
Loading...