SmartPay Pax D210 - Static IP Address Configuration; Terminal Reboot Procedure

15
Smartpay User Guide Pax D210 and D200 Wi-Fi
MERCHANT & COMMUNICATION SETTINGS
STATIC IP
ENTER IP ADDRESS
CLEAR TO CHANGE
SUBNET MASK
ENTER IP ADDRESS
CLEAR TO CHANGE
GATEWAY
ENTER IP ADDRESS
CLEAR TO CHANGE
NETWORK DNS
ENTER IP ADDRESS
CLEAR TO CHANGE
REBOOT REQUIRED
TERMINAL WILL
POWER DOWN NOW
• Type in static IP address
• Press ENTER key to continue
Use F1 for dots, use CLEAR to backspace if you make an error.
• Press ENTER to continue
or
• Press CLEAR change
• Type in Subnet Mask address
• Press ENTER to continue
or
• Press CLEAR to change
• Type in Gateway address
• Press ENTER to continue
or
• Press CLEAR to change
• Type in DNS address
Terminal will power down. Press power key to reboot.