To Next Page
D
Darlene SalasJul 27, 2025
How to access system logs on SmartRG SR505n?
- JjjarvisJul 27, 2025
To access system logs on your SmartRG Gateway: 1. Select 'Management' -> 'System Log'. 2. Click 'Configure System Log'. 3. Choose the 'Log Level' from the dropdown list; 'Debugging' offers the most detailed log information. 4. Select the 'Display Level' from the dropdown; 'Debugging' provides the greatest level of display detail. 5. Click 'Apply/Save'. 6. To configure the remote 'Mode' select 'Remote' from the drop down list and configure the remote server’s IP address and UDP port number.
General
