20
SETUP PIN LOCK
If you enable PIN Lock, the user will be asked to enter the PIN code when you launch the APP.
1. Enable the “Enable lock when starting” function. Then enter your PIN code.
2. Conrm your PIN code again.
1. Launch Settings from your Home screen.
2. Tap Notications.
3. Scroll down to nd “OMGuard HD” APP and tap on it.
4. Switch the toggle to ON/OFF in Notication Center.
Note:
If you forgot your PIN code, please uninstall the APP and reinstall it on the mobile device.
NOTIFY (PUSH NOTIFICATION)
The C995IP camera supports motion detection function. When any event is detected in the
camera site, you’ll receive push notification on the mobile devices for the event recognized by the
camera.
For iOS
If you want to enable/disable it, please follow the steps on your iOS mobile device:
Note:
It takes time for the changes to take effect in iOS, normally within 2 hours.
(iOS) (Android)
To Next Page
Loading...
Need help?
General
