25
Environment Mode
The Environment Mode settings allow you to select the power line frequency used at the location
of C995IP camera. The power line frequency varies depending on geographic region. It may
cause image flicker if wrong frequency is selected. Please check with local authorities for proper
setting.
There are two types video color tone, user can change the video c
olor tone between warm-
yellow(indoor) and cool-white (outdoor)
Low Light Enhancement
The Low Light Enhancement Mode is for improving the night view video image by providing 5
levels to select from (5 = brightest).
WI-FI SETTING
The Wi-Fi setting allows you to choose the wireless connection and setup the Wi-Fi environment.
When you tap the “Manage Wi-Fi network” button, the system automatically scans the nearby
network and shows the available Wi-Fi routers in the drop-down list. Choose the appropriate Wi-Fi
router and enter the Wi-Fi router password if necessary. Due to security concerns, it is suggested
to use the WPA/WPA2/ WPA2-PSK protocol for Wi-Fi network.
Note:
1. Unplug the Ethernet cable when the Wi-Fi connection is completed. The camera will
reboot and take a few minutes to establish the connection. Please re-launch the APP
when you see the green signal indicator lights up.
2. The
C995IP camera is designed to work with the legal Wi-Fi channels in your region.
Please refer to your Wi-Fi router manual to choose an appropriate channel for
C995IP camera.
3. If the camera fails to connect to the Wi-Fi router, press and hold reset button for 2
seconds to reset the system and repeat registration process again.
To Next Page
Loading...
Need help?
General
