Smartwares 019141716 - User Manual

Questions and Answers

M
Mark MillerAug 20, 2025
Why can't the Smartwares 019141716 app find the camera?
- B
  Brittany RobertsAug 20, 2025
  If the Smartwares Security Camera app can't find the camera, ensure your network supports the DHCP protocol. Also, verify that the camera and your mobile device are connected to the same Wi-Fi router during the initial setup. Check that the Wi-Fi router is activated and the camera is properly powered on. You might also need to manually add the camera using the “ADD CAMERA” function in the app.
R
Robert RobertsAug 22, 2025
What to do if no image appears on my Smartwares Security Camera?
- M
  Maria MorganAug 22, 2025
  If no image appears from your Smartwares Security Camera, first check that the power adapter is not damaged or defective and is plugged into a working electrical outlet. Try relocating the camera to improve wireless signal reception. Also, ensure the camera is properly configured in the app and that your mobile device has a stable 3G/4G/Wi-Fi connection.
C
Carl DiazAug 25, 2025
Why is my Smartwares 019141716 Security Camera app not recording video clips?
- A
  Andrew AguirreAug 25, 2025
  If the Smartwares Security Camera app is not recording video clips, make sure the SD card is correctly inserted. Verify that the motion detection function is enabled. If it's the first time using the SD card, format it. Also, ensure you are using a Class 10 rated memory card.
M
matthew97Aug 26, 2025
Why is motion detection not working on my Smartwares 019141716?
- N
  Nicole KleinAug 27, 2025
  If motion detection is not working or overreacting on your Smartwares Security Camera, ensure that the sensitivity setting is turned ON. Note that in motion detection mode, a moving object within the camera's viewing angle is necessary to trigger the motion sensor for recording.
M
Melissa MurphyAug 28, 2025
Why is my Wi-Fi router not showing up on my Smartwares 019141716?
- J
  Joseph HayesAug 28, 2025
  If your Wi-Fi router is not shown in the drop-down list for your Smartwares Security Camera, ensure that the SSID broadcasting function is enabled in the Wi-Fi router. Also, change the wireless security protocol of your Wi-Fi router to WPA/WPA2/WPA2-PSK.
C
Christina JacksonAug 29, 2025
Why is the email alert not working on my Smartwares 019141716 Security Camera?
- K
  kennethwilliamsAug 30, 2025
  If the email alert is not working for your Smartwares Security Camera, first ensure that the email alert function is enabled. It is suggested to use a Gmail account for this function. Also, verify that the email address has been correctly entered.
M
Melanie AdamsAug 31, 2025
How to correct the wrong date and time on my Smartwares 019141716?
- B
  Bobby ToddAug 31, 2025
  If the wrong date and time are displayed on your Smartwares Security Camera, ensure you’ve selected the correct time zone. Confirm the system date/time of your mobile device to ensure correct operation. Also, make sure the system is properly connected to the internet, as the system will sync its clock when connected.
M
Matthew PattersonSep 2, 2025
What causes bright white spots at night on my Smartwares Security Camera?
- M
  Morgan DunnSep 2, 2025
  Bright white spots appearing at night on your Smartwares Security Camera are caused by the camera's infrared LEDs reflecting off surfaces like glass. To resolve this, install the camera on the other side of the window or place the lens flush against the surface to improve night vision.
K
Kristin ZunigaSep 4, 2025
Why is my Smartwares Security Camera showing low wireless signal and poor image quality?
- C
  churchalexanderSep 4, 2025
  If your Smartwares Security Camera shows low wireless signal and poor image quality, it might be due to wireless devices interfering with the signal strength. Try to maximize the space between the camera/mobile device and these wireless devices. Additionally, clean the camera lens using a lens cleaning cloth.
R
Richard JonesSep 6, 2025
What to do if the Smartwares Security Camera app can not record any video clips?
- R
  rose66Sep 6, 2025
  If the Smartwares Security Camera app is not recording video clips, first ensure that the SD card has been correctly inserted. Also, make sure the motion detection function has been enabled. Format the SD card when using it for the first time and verify that you are using a Class 10 rated memory card.

Smartwares 019141716 Specifications

General

Placement	Outdoor
Night Vision	Yes
Weatherproof	Yes
Viewing Angle	110°
Motion Detection	Yes
Storage	MicroSD card (up to 128 GB)
Wi-Fi	Yes
Weather Resistance	IP65
Mobile App	Yes
Type	Security Camera
Connectivity	Wi-Fi
Maximum Resolution	1920 x 1080 pixels
Resolution	1920x1080