23
ADMIN PASSWORD
The Admin Password is a specific security code for the administrator to change the advanced
settings. The default admin password is 123456.
Please use this function to change the default admin password into your personal admin password.
For the protection of your system conguration, every time you change the advanced settings, you
need to enter the admin password. Please change the admin password periodically.
EMAIL ALERT
The camera supports the motion detection function, which is capable of detecting movements
within the camera view, following with notifying user the sudden event with push notication and/or
email alert, the system can also begin recording.
When motion detection is enabled and the system detects movement:
- The system will begin recording.
- With Push Notication enabled, the system will send out notication message to user’s mobile
device.
- With Email Alert enabled, the system will send out Email to alert user the event.
Note:
If you forgot your admin password, please long press the reset button on the camera DC
jack for 5 seconds to restore the password into factory default value 123456 (please refer
to the Camera Overview section). All settings will be restored to factory default. You will
need to congure your camera from the start.
Note:
By default, the system has been limited to send out the email alert every 1 minutes to
prevent overloading user’s email account.
Function Setting Action (when movement is detected)
Email Alert ON Camera: Start video recording
Email account: Email alert
Push Notication ON Camera: Start video recording
Mobile Device: Text noticationMotion
Detection OFF Camera: Manual Recording
Email account: No action
Mobile Device: No action
To Next Page
Loading...
Need help?
General
