18 GB/IE
phone on different networks - connected via internet) Connec-
tion quality = good / normal / poor.
Note: For details and more information, please refer to the included
tutorial CD
4
.
Notice to Android users: Close the app after viewing the camera
image on your mobile. To do so, from the main screen in the app,
press and hold the respective button at the bottom left corner of the
display. The EXIT command will appear. Select it to close the app.
Note: Depending on the operating system and version you may not
have full access to all functions.
Troubleshooting
No image appears.
Check the display (LED) on the camera.
Verify the camera is connected to power with the included
adapter.
Check the connections of the Ethernet cable.
The camera does not respond, the camera image freezes.
Hold the RESET button
10
for approx. 45 seconds to restart.
Whilst holding the button, first the red, then the green, and finally
the red LED again, will flash. After releasing the RESET button
10
it will take approx. 45 seconds for the camera to reconnect to the
network. After this, the red and green LED will light up. The green
LED will light up when the camera is connected to the tethered net-
work. The camera is now again ready for use.
All settings will be reset to the factory settings. It will need to be
completely reconfigured.
To Next Page
Loading...
Need help?
General
