Important Note
The state of the art Baby IP Camera HD is capable of delivering high quality Digital High Definition
(HD) video to your smart-mobile device(s), which would require higher internet bandwidth. Due
to your local internet environment condition, your mobile device(s) may display black-screen
or temporary disconnect to the camera.
* Make sure the camera is operating with sufcient internet bandwidth, 1Mbps (upload/
download speed) is suggested.
* For best performance, the smart-mobile device(s) need to be on Wi-Fi or 4G mobile network
in order to receive maximum download speed.
* When the internet transmission is low, your WAPP APP will automatically switch to Relay
Mode:
‧
By adjusting to “Better Streaming” in the system setting section may improve
the camera performance.
* Your internet bandwidth is limited.
For best performance, try to avoid more than two users
connecting to the camera simultaneously.
* Make sure your smart-mobile device(s) is equipped with up-to-date technology, 1.5GHz dual
core processor or equivalent is suggested.
* If the signal strength of your Wi-Fi router is weak, there are several ways to improve
transmission:
‧
Change router/camera relative position to receive better signal.
‧
Use wire Ethernet cable on the camera to establish connection between camera
and
your router.
‧
Use Wi-Fi repeater/extender to maximize the service range of your Wi-Fi route.
‧
Switch your router to 11b/11g mode in order to improve router service range.
‧
Purchase extension cable or high gain antenna for your camera from the vendor.
* Please make sure the memory card used is CLASS10 rated.
To Next Page
Loading...
Need help?
General
