SMC Corporation LECP1 series User Manual

No. JXC※-OMU0029-A
PRODUCT NAME
Programless controller
Step motor (servo 24 VDC)
MODEL / Series / Product Number
LECP1 Series

SMC Corporation LECP1 series Specifications

General

Brand	SMC Corporation
Model	LECP1 series
Category	Controller
Language	English

Summary

Safety Instructions

Product Specifications

Basic Specifications

Details the electrical, mechanical, and environmental specifications of the controller.

How to Install

CN4: Parallel I/O Connector

Parallel I/O Specifications

Details input and output specifications for parallel I/O.

Parallel I/O Signal Details

Provides detailed information on parallel I/O signals and cable specifications.

Setting Method

Setting Procedure: Power, Mode, and Origin

Setting Position & Operation: Jog/Inching Method

Steps for setting positions and operation methods using jog/inching.

Setting Position & Operation: Direct Teaching Method

Steps for setting positions and operation methods using direct teaching.

Test Run and Finalizing Settings

Operations

Return to Origin and Positioning

Procedures for returning the actuator to origin and performing positioning.

Pushing Operations Details

Details successful/failed pushing, and work piece movement.

Jog and Inching Operations Guide

Explains how to perform jog and inching operations manually.

Operation Instructions

Positioning & Return to Origin Example

Example of an operation pattern for positioning and return to origin.

Pushing Operation Example

Example of an operation pattern for pushing operations.

Stoppage and Alarm Handling

Explains how to stop operations and handle alarms.

Initial Setting Values per Electric Actuator

LEF Series Initial Settings

Provides initial setting values for LEF series actuators.

LEH Series Initial Settings

Provides initial setting values for LEH series actuators.

LES, LESH Series Initial Settings

Provides initial setting values for LES and LESH series actuators.

LEY, LEYG Series Initial Settings

Provides initial setting values for LEY and LEYG series actuators.

LER Series Initial Settings

LEPY, LEPS Series Initial Settings

LEL Series Initial Settings

LEM Series Initial Settings

Alarm Detection

Alarm Group Output

Alarm Details and Countermeasures

Troubleshooting