SMC Networks Barricade SMC7008ABR User Manual

7008ABR – Manual
41
If you are still unable to get an IP Address from the Barricade, reinstall your network adapter. Please
refer to your adapter manual for information on how to do this.
A.3 | I have another IP Address displayed
If you have another IP address listed then the PC may not be configured for a DHCP connection.
Please refer to Chapter 4 | Configure your Computer for information.
Once you have confirmed your computer is configured for DHCP, then please follow the steps below.
1. Open a DOS window as described above.
2. Type “ipconfig/release” (without the quotes)
3. Then type “ipconfig/renew” (without the quotes)
Once you are able to get a valid IP address from the Barricade Router then you can now access
the web-based Administration pages.
If you still are not getting an IP address from the Barricade please reset the router as outlined in
Chapter 2 and follow the steps outlined in this appendix again.
If you still cannot access the router once you have reset it, please contact SMC Technical
Support.

SMC Networks Barricade SMC7008ABR Specifications

Ports & Interfaces

Ethernet ports	8 10Base-T/100Base TX RJ-45 ports
Broadband WAN port	One 10Base-T port
PSTN/ISDN connection port	One DB-9 port
Printer port	One DB-25 port

Operating Environment

operating temperature	0 to 40°C
storage temperature	-40 to 70°C
humidity	5% to 95% (non-condensing)

Weight and Dimensions

size	24.92 x 11.63 x 3.66 cm
weight	1.766 kg