SMC Networks barricade SMCWBR14-G2

R OUTING
4-69
Routing
This section defines routing related parameters, including static routes and
RIP (Routing Information Protocol) parameters.
Static Route
Click Add to add a new static route to the list.
Click Save Settings to save the configuration.
Parameter Description
Index Index number of the route.
Network Address Enter the IP address of the remote computer for which to set
a static route.
Subnet Mask Enter the subnet mask of the remote network for which to set
a static route.
Gateway Enter the WAN IP address of the gateway to the remote
network.
Configure Allows you to edit existing routes.