H
OME
N
ETWORK
S
ETTINGS
4-21
PPTP
The PPTP screen displays the IP Address, Subnet Mask and Default
Gateway of your Barricade. Enter the User ID and Password assigned by
your ISP in the appropriate fields. Enter the Idle Time Out for the Internet
connection. This is the period of time for which the connection to the
Internet is maintained during inactivity. The default setting is 10 minutes.
If your ISP charges you by the minute, you should change the Idle Time
Out to one minute. After the Idle Time Out has expired, set the action you
wish the Barricade to take. You can tell the device to connect manually or
automatically as soon as you try to access the Internet again, or to keep the
session alive.
Click Save Settings to proceed, or Cancel to change your settings.
To Next Page
Loading...
Need help?
General
