SMC Networks barricade SMCWBR14-G2 User Manual

T ROUBLESHOOTING
A-3
Management Problems
Cannot connect
using the web
browser
• Be sure to have configured the Barricade with a valid
IP address, subnet mask, and default gateway.
• Check that you have a valid network connection to the
Barricade and that the port you are using has not been
disabled.
• Check the network cabling between the management
station and the Barricade.
Forgot or lost
the password
•Press the Reset button on the rear panel (holding it
down for at least six seconds) to restore the factory
defaults.
Troubleshooting Chart
Symptom Action

SMC Networks barricade SMCWBR14-G2 Specifications

General

Brand	SMC Networks
Model	barricade SMCWBR14-G2
Category	Wireless Router
Language	English