S
ECURITY
4-49
802.1X
If 802.1X is used in your network, then you should enable this function for
the Barricade. This screen allows you to set the 802.1X parameters. 802.1X
is a method of authenticating a client wireless connection. Enter the
parameters below to connect the Barricade to the Authentication Server.
Parameter Description
802.1X Authentication Enable or disable the authentication function.
Session Idle Timeout This is the time (in seconds) that a session will sit inactive
before terminating. Set to 0 if you do not want the session
to timeout. (Default: 300 seconds)
Re-Authentication
Period
The interval time (in seconds) after which the client will
be asked to re-authenticate. For example, if you set this to
30 seconds, the client will have to re-authenticate every 30
seconds. Set to 0 for no re-authentication.
(Default: 3600 seconds)
Quiet Period This is the interval time (in seconds) for which the
Barricade will wait between failed authentications.
(Default: 60 seconds)
Server Type Sets the authentication server type.
Server IP Set the IP address of your RADIUS server.
To Next Page
Loading...
Need help?
General
