-26-
3. Choose the “PRTmate: (All-in-1)” from the list attached at the Print To item. Be sure
that the Printer Driver item is configured to the correct driver of your server printer.
4. Click on the button of Port Settings:
Type in the IP address of this product and then click the OK button.
5. Make sure that all settings mentioned above are correct and then click the OK button.
5.2 Configuring on Windows NT Platforms
The configuration procedure for a Windows NT platform is similar to that of Windows
95/98 except the screen of printer Properties:
To Next Page
Loading...
Need help?
General
