SMC Networks Barricade Cable/DSL Router User Manual

Cable/DSL Router
User Guide
The information furnished by SMC Networks, Inc. (SMC) is believed to be accurate and
reliable. However, no responsibility is assumed by SMC for its use, nor for any
infringements of patents or other rights of third parties which may result from its use. No
license is granted by implication or otherwise under any patent or patent rights of SMC.
SMC reserves the right to change specifications at any time without notice.
Copyright © 2000 by
SMC Networks, Inc.
6 Hughes, Irvine, CA 92618
All rights reserved.

SMC Networks Barricade Cable/DSL Router Specifications

General

Brand	SMC Networks
Model	Barricade Cable/DSL Router
Category	Network Router
Language	English

Summary

Chapter 2 Hardware Installation

2.3 Procedure for Hardware Installation

Provides step-by-step instructions for physically connecting the router.

Chapter 3 Network Settings and Software Installation

3.1 Setting your computer network settings properly

Guides users on configuring PC network settings, including IP and subnet mask.

3.2 Install the Software into Your Computers

Chapter 4 Configuring the Barricade

4.1 Startup and Log in

Explains how to access and log into the router's web-based configuration interface.

4.4 Primary Setup

Details basic configuration settings, including LAN IP and WAN connection types.

4.5 DHCP Server

Explains how to configure the DHCP server for automatic IP allocation.

4.6 Virtual Server

Guides on setting up port forwarding to make internal services accessible externally.

4.7 Special AP

4.8 Access Control

Details how to set access rights for users based on IP addresses and ports.

Appendix B: TCP/IP Configuration for Windows 95/98

B.2 Setting TCP/IP protocol to work with the Barricade