SMC Networks TigerSwitch SMC6709FL2 User Manual

TigerSwitch 10/100
9-Port Fast Ethernet Switch
◆ 8 10BASE-T/100BASE-TX ports, 1 100BASE-FX
MMF port
◆ 1.8 Gbps aggregate bandwidth
◆ Spanning Tree Protocol
◆ Port mirroring for non-intrusive analysis
◆ QoS support with two priority queues
◆ Full support for VLANs with GVRP
◆ IP multicasting with IGMP snooping
◆ Security filtering based on MAC addresses
◆ Manageable via console, Web, SNMP/RMON
Management Guide
SMC6709FL2

SMC Networks TigerSwitch SMC6709FL2 Specifications

General

Brand	SMC Networks
Model	TigerSwitch SMC6709FL2
Category	Network Router
Language	English

Summary

Introduction

Key Features

Lists the main hardware and software features of the switch.

Description of Software Features

Explains the functionality of various software features like STP, VLANs, and Port Mirroring.

System Defaults

Details the default configuration settings for the switch's functions.

Initial Configuration

Connecting to the Switch

Explains how to establish a connection to the switch for management.

Basic Configuration

Covers essential initial settings such as user name, password, and IP address.

Setting an IP Address

Provides steps to configure the switch's IP address, subnet mask, and gateway.

Enabling SNMP Management Access

Details how to enable and configure SNMP for remote management.

Configuring the Switch

Using the Web Interface

Guide to managing the switch via its web-based graphical interface.

Main Menu

Outlines the available options and their corresponding pages in the web interface.

Port Configuration

Details on displaying connection status and configuring port settings.

Configuring Interface Connections

Instructions for setting speed, duplex mode, and flow control for ports.

Trunk Configuration

Information on setting up static and dynamic port trunks for link aggregation.

VLAN Configuration

Explains how to create and manage Virtual LANs for network segmentation.

Spanning Tree Protocol Configuration

Configuration steps for Spanning Tree Protocol to prevent network loops.

Port Mirroring

How to configure port mirroring for traffic analysis.

User Authentication

Procedure for setting up user authentication for switch access.

Software Specifications

Switch Features

Lists the key hardware and software features supported by the switch.

Management Features

Details the methods for managing the switch, including in-band and out-of-band.

Standards

Lists the networking standards implemented by the switch.

Upgrading Firmware

Upgrading Firmware

Detailed instructions for updating the switch's firmware using XModem protocol.

Troubleshooting

Troubleshooting Chart

Provides solutions for common connection and configuration problems.