S
WITCH
S
TATIC
C
ONFIGURATION
M
ENU
4-21
Configuring Port-based VLANs
Use the VLAN Configuration menu to create port-based VLANs.
Console – Click Switch Static Configuration
=>
VLAN Configuration
=>
VLAN Configure. Set VLAN Mode to “PortBased,” and save this setting.
Click Switch Static Configuration
=>
VLAN Configuration
=>
Create a
VLAN Group. Enter the VLAN Name (1-15 characters) and Group ID
(1-4094). Use the Space bar to select port members, and save your settings.
Tiger Switch 10/100 6709FL2 : VLAN Support Configuraton
============================
VLAN Mode :PortBased
actions-> <Quit> <Edit> <Save>
Select the Action menu.
Tab=Next Item BackSpace=Previous Item Quit=Previous Menu Enter=Select Item
To Next Page
Loading...
Need help?
General
