1-1
C
HAPTER
1
I
NTRODUCTION
This switch provides a broad range of features for switching. It includes a
management agent that allows you to configure the features listed in this
manual. The default configuration can be used for most of the features
provided by this switch. However, there are many options that you should
configure to maximize the switch’s performance for your particular
network environment.
Key Features
Feature Description
Authentication Console, Telnet, Web – User name / password
SNMP – Community strings
Configuration
Backup / Restore
Backup to TFTP server
Port Configuration Speed, duplex mode and flow control
Port Mirroring One or more ports mirrored to single analysis port
Static Address Up to 8K MAC addresses in the forwarding table
Trunks Static trunks or dynamic Link Aggregation Control Protocol
Spanning Tree
Protocol
Supported
Virtual LANs Up to 128
Traffic
Prioritization
Supports two priority queues; queuing based on First-In
First-Out (FIFO), high queue before low queue, or Weighted
Round Robin (WRR)
Multicast Filtering Supports IGMP snooping and query
To Next Page
Loading...
Need help?
General
