C
ONSOLE
I
NTERFACE
4-40
Spanning Tree Protocol Menu
Use the STP menu to configure the Spanning Tree Protocol. STP detects
and disables network loops and provides backup links between switches,
bridges, and routers to ensure that only one route exists between any two
stations on the network. The backup links automatically take over when a
primary link goes down.
Tiger Switch 10/100 6709FL2 : Spanning Tree Protocol
===========================
STP Enable
System Configuration
Perport Configuration
Previous Menu
Enabled or disabled the Spanning Tree Protocol.
Tab=Next Item BackSpace=Previous Item Enter=Select Item
Menu Description Page
STP Enable/Disable Enables/disables Spanning Tree Protocol 4-41
System Configuration Configures global bridge parameters for STP 4-43
Perport Configuration Configures port-specific parameters for STP 4-45
To Next Page
Loading...
Need help?
General
